ENHWI-3GN3 User’s Manual
www.encore-usa.com
37
5.2 – WIZARD
Click Wizard to configure the basic functionalities of the ENHWI-3GN3 Router. A popup Setup
Wizard Window will be displayed. If the popup window for Setup Wizard failed to appear check
your Popup Settings and make sure popup is allowed at least temporarily for this purpose.
Before you continue, check all the needed cables if they are properly hooked up. Check your
3G, DSL or Cable Modem if working properly and is connected to your ISP and then click
<Next>. Refer to the Smart Wizard section on Page 20
for more details.
To Next Page
Loading...
Need help?
General
