Encore ENHWI-3GN3 - Pc Network Adapter Setup (Windows Xp)

ENHWI-3GN3 User’s Manual
www.encore-usa.com
10
2.5 - PC NETWORK ADAPTER SETUP
Windows XP
• Assuming your PC or Laptop is already equipped with a Network Interface Card and
properly working. Click on START Æ select “Control panel” Æ From the Control Panel
Window select “Network Connection”
• Right-click (Use the right button of your mouse) the “Local Area Connection” icon then
select and click “Properties”
• Click to Highlight the “Internet Protocol (TCP/IP)” then click “Properties” button