ENHWI-3GN3 User’s Manual
www.encore-usa.com
46
5.4 – WIRELESS SETTINGS
• Basic Tab
In Basic tab page, you can set wireless Radio Disable or Enable, WDS, AP or
Repeater Mode, Band selections, Number of SSID’s up to 4, Enable / Disable Auto
Channel and Channel number.
Radio: You can turn on/off wireless radio. If wireless Radio is turned off, the
ENHWI-3GN3 will not take wireless connections.
Mode: Three operation modes for selections, the AP router and AP router
with WDS. If you choose AP Router Mode, there will be two selections
under it, the AP or WDS function in the drop-down menu.
Band: You can select the wireless standards running on your network
environment such as the following:
2.4 GHz(B): If all your clients are using 802.11b
2.4 GHz(N): If all your clients are using 802.11n
2.4 GHz(B+G): If both 802.11b or a 802.11g
2.4 GHz(G): If all your clients are using 802.11g
2.4 GHz(B+G+N): If your clients are mixed using 802.11b,
802.11g, or 802.11n
Enable SSID: ENHWI-3GN3 supports up to 4 SSID’s. Use the down arrow to
select the number of SSID you wanted to have in your wireless
LAN. Once established you can set the security policy settings
for each. See “Policy” section for more details.
To Next Page
Loading...
Need help?
General
