ENHWI-3GN3 User’s Manual
www.encore-usa.com
47
SSID1 to SSID4: Whatever is entered into the SSID block that will be the name
of your wireless network. It is recommended to use a unique name
to identify your wireless device in the WLAN such as “Guests”,
“Home”, etc. This is case sensitive and up to 32 printable
characters.
Auto Channel: Disabled by default. If Enabled, will automatically search all
channels and automatically change to the clearest channel
detected. Different items are visible below the Auto Channel.
Channel: Channel 11 by default. This is visible only when the Auto Channel is
disabled. You can enter your preferred channel number here for the
ENHWI-3GN3 wireless LAN.
Check Channel Time: This menu is visible only when the Auto Channel is
enabled. Selections are from One Hour to One Week.
This is the duration of when will the ENHWI-3GN3
check for and use the clearest channel in the area
automatically.
WDS Mode
The Wireless Distribution System is a way of interconnecting wireless routers
and allow an extended wireless network coverage using multiple wireless routers
without the use of a wired backbone. Each WDS AP requires the same channel
and encryption type to work. Setting up a WDS requires an in-depth knowledge
in computer networking. If you are not familiar with this setting consult a PC
network engineer.
To Next Page
Loading...
