ENHWI-3GN3 User’s Manual
www.encore-usa.com
8
2.2 – WALL MOUNTING
Bottom View Showing Wall Mounts
The ENHWI-3GN3 is wall mountable. There are two mounting holes at the bottom of the router.
Find a proper spot where two nails or wall screws can be applied. The distance between the two
nails is 117 mm. Carefully mount the device onto the wall and make sure the router is firmly in
place.
2.3 – BEST LOCATION
You can place ENHWI-3GN3 on a desk or other flat surface, or you can mount it on a wall. For
optimal performance, place your router in the center of your office (or your home) in a location
that is away from any potential source of wireless interference, such as a metal wall or
microwave oven. The preferred location should be close to a electrical power wall outlet. If the
antennas are not positioned correctly, performance loss can occur.
To Next Page
Loading...
Need help?
General
