ENHWI-3GN3 User’s Manual
www.encore-usa.com
39
• Dynamic IP Tab
Use the MAC address when registering for the Internet service, and do not change it unless
required by your ISP. If your ISP use the MAC address of the Ethernet card as an identifier,
connect only the PC with the registered MAC address to the broadband router and click the
<Clone MAC Address> button. This will replace the current MAC address with the already
registered Ethernet card MAC address.
Host Name: This is optional.
MAC address: The default value is set to the WAN’s physical address or MAC of the broadband
router.
To Next Page
Loading...
Need help?
General
