ENHWI-3GN3 User’s Manual
www.encore-usa.com
54
Key1 - Key4:
The WEP keys are used to encrypt data transmitted in the wireless network. Use
the following rules to setup a WEP key on the device.
64-bit WEP:
input 10-digits Hex values (in the "A-F", "a-f" and "0-9" range)
or 5-digit ASCII character as the encryption keys.
128-bit WEP:
input 26-digit Hex values (in the "A-F", "a-f" and "0-9" range)
or 13-digit ASCII characters as the encryption keys.
Click <Apply> at the bottom of the screen to save the above configurations.
WPA Pre-Shared Key Encryption
Wi-Fi Protected Access (WPA) is an advanced security standard. You can use a pre-
shared key to authenticate wireless stations and encrypt data during communication.
It uses TKIP or CCMP (AES) to change the encryption key frequently. The
encryption key is not easy to be cracked by hackers. This is the best security
available.
To Next Page
Loading...
Need help?
General
