ENHWI-3GN3 User’s Manual
www.encore-usa.com
75
TOOLS
• Admin Tab
You can change the password required to log into the broadband router's system
web-based management. By default, the password is admin. Passwords can
contain 0 to 12 alphanumeric characters, and are case sensitive.
Old Password: Fill in the current password to allow changing to a new
password.
New Password: Enter your new password and type it again in Repeat New
Password for verification purposes
Remote management
Allows you to designate a host over the internet and the ability to configure
the broadband router from a remote site. Enter the designated host IP
Address in the Host IP Address field.
Host Address: This is the IP address of the host over in the Internet that will
have management/configuration access to the Broadband
router from a remote site. If the Host Address is left 0.0.0.0 this
means anyone can access the router’s web-based configuration
from a remote location, provided they know the password.
Port: The port number of the remote management web interface.
To Next Page
Loading...
