CTS Mode (clear to send): None- disable CTS function. Always- Regardless of
wireless environment (11b or 11g), platform will always transfer 11g packet.
Auto- AP soon detected the wireless environment and decided the transmission
packet, either 11b or 11g.
WDS (Wireless Distribution System): Only use in AP mode. It will add client
quantity at the back when you enable this function.
11g mode only: User can use 11g only when he selects “enable”.
Super G mode: Super G mode is disabled by selecting “Disable” from the drop
list. If you like to use Super G to enhance the speed, there are three options on
Super G mode: Super G without turbo; Super G with Dynamic turbo and Super
G with Static turbo. Turbo mode indicates the combination of two channels to
enhance the throughput. Super G without turbo indicates that it is on Super G
mode without the channel’s combination. Dynamic turbo is able to
automatically detect if any ‘Super G based’ product is available. If no, the
connection is via ‘normal’ G. Static turbo means it will not go back to ‘normal’
G once it starts.
Antenna Transmit Power: Adjust the power of the antenna transmission by
selecting from the dropping list.
Aging Interval: To limited STA connect timing.
16
To Next Page
Loading...