Tools
Four functions are provided in this page, Backup, Restore Settings, Restore
default settings and Firmware Upgrade.
Figure 19. Tools
Backup Settings: Click on “Backup” button, which will open a FileSave
Dialog box, where you get to save all the current settings and configurations to a
file.
Restore Settings: Click on the “Browse” button to open a FileOpen Dialog box,
where you get to select the file, which you save previous settings and
configurations. Upon selecting the saved file, click “Restore” and complete the
restore process when the access point re-operates after it restarts.
Restore to default settings: Click on “Default” button to restore the access
point back to its manufacture default settings.
Firmware Upgrade: Click on the “Browse” button to open a File Open Dialog
box, where you get to select the firmware file, which you download from the
web for the latest version. Upon selecting the firmware file, click “Upgrade”
and complete the firmware upgrade process when the Access Point re-operates
after it restarts.
SNMP: Enable or disable.
18
To Next Page
Loading...
Need help?
General
