6
What about the X-axis movement get
stuck, after the machine is installed
or left for a period of time?
Here is our suggestion for you problem:
Please check that the V-wheel is not stuck,
Then adjust the V-wheel until it moves smoothly.
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
7
Do Z-axis limit switches need to be
installed?
Here is our suggestion for you problem:
The dimensions of the printed model of this printer are: length/width/height 220*220*270
mm
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
Issue about basic parameter
8 What is the print size?
Here is our suggestion for you problem:
The dimensions of the printed model of this printer are: length/width/height 220*220*270
mm
We hope this helps you.
If you need further assistance with this issue, you can always contact us
9
Does this machine support two-color
printing?
Here is our suggestion for you problem:
Sorry, this printer is a single printhead construction and does not support two-colour
printing
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
10
What is the printing precision of the
machine?
Here is our suggestion for you problem:
The printer comes standard with a 0.4mm nozzle.
It can support an accuracy range of 0.1-0.4mm
We hope this helps you.
If you need further assistance with this issue, please feel free to contact us
To Next Page
Loading...
