Need help?Do you have a question about the Ender 3 Neo and is the answer not in the manual?
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Print Speed | up to 120 mm/s |
| Connectivity | MicroSD card, USB |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 100°C |
| Frame Material | Aluminum |
| Power Supply | 350W |
| Machine Weight | 7.8 kg |
| Machine Dimensions | 440 x 440 x 465 mm |
| Supported Materials | PLA, PETG |
| Bed Leveling | Automatic |
Instructions for assembling the Z-axis profiles to the printer base.
Steps to mount the screen and power supply unit onto the printer.
Guides on installing the Z-axis motor and the T-type screw rod.
Instructions for attaching the extrusion kit to the X-axis profile.
Details on threading and installing the X-axis timing belt.
Steps for sliding the nozzle kit into the X-axis profile.
Instructions for attaching the Z-axis passive block to the X-axis profile.
Guides on installing the X-axis passive block and tensioning the timing belt.
How to fit the X-axis kit and adjust its tightness for smooth operation.
Steps for securing the top gantry profile and attaching cover plates.
Instructions for assembling and attaching the filament rack and barrel.
Detailed guide on connecting various cables and ports for printer operation.
Instructions for installing the Teflon tube and using wire clips.
Steps to check and adjust the tightness of the X, Y, and Z axis pulleys.
Navigating the menu to perform the Auto Home function.
Adjusting the Z-axis movement for fine-tuning.
Setting the probe Z offset for accurate first layer adhesion.
Disabling steppers to allow manual adjustment of the print bed.
Navigating menus to initiate and complete the bed leveling process.
Saving the Z-axis compensation data after leveling.
How to select and start a print job from the memory card.
Adjusting Z-axis offset based on filament adhesion to the platform.
Steps for preheating the nozzle and bed for filament loading.
Detailed procedure for loading filament into the extruder.
Instructions for obtaining and installing the Creality slicing software.
Setting up printer parameters and basic software configurations.
Creating and saving the G-code file for printing.
Transferring the G-code to the memory card and initiating a print.
To Next Page
