Ender 3 Neo - Start Printing with Slicing Software; Download and Install Slicing Software; Configure Slicing Software Settings

9.Start Printing
9.1Download the Creality software at www.creality.com,
or find it in the memory card and install it.
Creality Slicer
9.2 Select in turn Preferences → Basic → Select
Language → Close to complete the settings.
9.3 Select current model (Ender-3 Neo). 9.4 Enter Parameters → Close.
Neo
新增打印机
19
Ender-3 Neo
Neo
Neo
Neo