Ender 3 Series User Manual

Ender 3 Series 3D Printer
User Manual
◆ This Manual is for the Ender 3 Series of 3D printers.
◆ Select the correct input voltage to match your local mains
(230V or 115V)
◆ Because of software/hardware upgrades and model
differences, new revisions may not be listed in this guide.
◆ Detailed instructions for use are available on the TF card.

Ender 3 Series Specifications

General

Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1 - 0.4 mm
Filament Diameter	1.75 mm
Max Print Speed	180 mm/s
Printing Technology	FDM (Fused Deposition Modeling)
Connectivity	SD Card, USB
Heated Bed	Yes
Machine Dimensions	440 x 410 x 465 mm
Nozzle Diameter	0.4 mm
Supported Materials	PLA, TPU, PETG

Summary

Preface

1. Introduction to Ender 3 Printer

2. Understanding the Printer Screen

Printer Displayed Information

Details the real-time data shown on the Ender 3 screen, including temperatures and print status.

Navigating the Screen Menu

Guide to accessing and using the printer's menu for preparation, control, and tuning functions.

3. Loading Filament for Printing

Filament Preheating Procedures

Covers two methods for preheating the nozzle to facilitate filament insertion.

Filament Feeding Technique

Manual for correctly inserting and guiding filament through the extruder and into the hotend.

4. Bed Leveling Guide

5. Software Installation Steps

6. Preparing for 3D Printing

3D Model Slicing Process

Explains how to use slicing software to generate gcode files from 3D model data.

Initiating a Print Job

Procedure for transferring sliced files via TF card and starting the printing process.

7. Troubleshooting Common Issues

8. Circuit Wiring Diagram