Ender 3 Series Quick Start Guide

Ender 3 Series 3D Printer
Quick Start Guide
◆ ThisguideisfortheEnder3Seriesof3Dprinters.
◆ Selectthecorrectinputvoltagetomatchyourlocalmains
(220Vor110V)
◆ Becauseofsoftware/hardwareupgradesandmodel
differences,newrevisionsmaynotbelistedinthisguide.
◆ DetailedinstructionsforuseareavailableontheSDcard.
V.1.0

Ender 3 Series Specifications

General

Build Volume	220 x 220 x 250 mm
Layer Resolution	0.1 - 0.4 mm
Filament Diameter	1.75 mm
Max Print Speed	180 mm/s
Printing Technology	FDM (Fused Deposition Modeling)
Connectivity	SD Card, USB
Heated Bed	Yes
Machine Dimensions	440 x 410 x 465 mm
Nozzle Diameter	0.4 mm
Supported Materials	PLA, TPU, PETG