Need help?Do you have a question about the Ender Ender-3 Max Neo and is the answer not in the manual?
General| Build Volume | 300 x 300 x 320 mm |
|---|---|
| Layer Resolution | 0.1-0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 100°C |
| Connectivity | MicroSD Card, USB |
| Frame Material | Aluminum |
| Printing Technology | FDM (Fused Deposition Modeling) |
| Power Supply | 350W |
| Supported Materials | PLA, ABS, PETG |
| Bed Leveling | Automatic |
| Display | 4.3-inch Color |
| Machine Dimensions | 516 x 582 x 590 mm |
Instructions for upgrading the printer firmware via the official website.
Steps to install the gantry frame onto the printer base.
Procedure for mounting and connecting the printer's display screen.
Instructions for attaching the filament material rack to the printer.
To Next Page
