Need help?Do you have a question about the Ender 3 V2 Neo and is the answer not in the manual?
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Supported Filaments | PLA, ABS, PETG |
| Power Supply | 350 W |
| Display | 4.3-inch Color LCD |
| Max Nozzle Temperature | 260°C |
| Max Bed Temperature | 100°C |
| Frame Material | Aluminum |
| Machine Weight | 7.8 kg |
| Connectivity | MicroSD, USB |
| Bed Leveling | CR Touch Auto Leveling |
| Printing Speed | up to 120 mm/s |
Step-by-step guide for assembling the gantry frame onto the base.
Guide to connecting various motor and limit switch cables, with voltage caution.
Setting the Z-axis compensation for optimal nozzle-to-bed distance.
Fine-tuning Z-offset for central point levelling using A4 paper.
Manually levelling the print bed at four corners for proper adhesion.
Downloading and installing the Creality Slicer software from the website or memory card.
Inserting the memory card and selecting the file for printing.
To Next Page
