Need help?Do you have a question about the Ender Ender-3 S1 Pro and is the answer not in the manual?
General| Build Volume | 220 x 220 x 270 mm |
|---|---|
| Nozzle Diameter | 0.4 mm |
| Max Nozzle Temperature | 300°C |
| Max Bed Temperature | 110°C |
| Filament Diameter | 1.75 mm |
| Display | 4.3-inch Color Touch Screen |
| Frame Material | Aluminum |
| Leveling | Automatic bed leveling |
| Technology | FDM (Fused Deposition Modeling) |
| Extruder Type | Direct Drive |
| Machine Weight | 9.1 kg |
| Supported Filaments | PLA, ABS, PETG, TPU |
| Connectivity | SD Card, USB |
| Print Speed | 150 mm/s |
| Power Supply | 350W |
Details connections and ports on the mainboard for various functions.
Explains port connections specific to the nozzle and its associated components.
Outlines the pinboard connections for the Z-axis motor and limit switch.
Steps to attach the nozzle module and secure the wire clamp to the X motor.
Instructions for assembling the gantry onto the printer's base module.
Guide to mounting the display screen onto the printer's frame.
Instructions for attaching the filament rack to the printer.
Shows basic wiring connections for motor ports and limit switches.
Connects various components like motors, limit switches, and filament detectors.
Steps for removing old filament and installing new filament into the printer.
To Next Page
