To Next PageTo Next Page
Need help?Do you have a question about the Ender 3 PRO and is the answer not in the manual?
Identify and inspect all parts listed in the Bill of Materials for the Ender-3 Pro 3D printer.
Attach the main aluminum extrusions (L and R) to the printer's base (Ba) using screws and washers.
Mount the switching power supply unit (P) and the operation screen assembly (S) to the printer base.
Mount the Z-axis limit switch assembly (ZI) onto the aluminum profile of the printer's base.
Attach the Z-axis motor assembly (Zm) and connect the T8 Acme lead screw to the coupling.
Gather and prepare all necessary components for the X-axis bearing installation.
Assemble the aluminum profile (B1) with the extrusion assembly (E) and install the timing belt.
Install the belt tensioner assembly (K1) and adjust the X-axis belt tension.
Mount the X-axis assembly onto the base (Ba) and ensure smooth vertical movement.
Attach the aluminum profiles (B2) to form the gantry frame and secure end caps.
Install the plastic tube (R1) and sheet metal bracket (R2) for the rack system.
Connect all wire harnesses and the PTFE Bowden tube according to the diagram.
General| Build Volume | 220 x 220 x 250 mm |
|---|---|
| Layer Resolution | 0.1 - 0.4 mm |
| Filament Diameter | 1.75 mm |
| Nozzle Diameter | 0.4 mm |
| Connectivity | SD card, USB |
| Technology | FDM (Fused Deposition Modeling) |
| Frame Material | Aluminum |
| Machine Dimensions | 440 x 410 x 465 mm |
| Bed Leveling | Manual |
| Display | LCD |
| Print Speed | up to 180 mm/s |
| Max Bed Temperature | 110°C |
| Supported Materials | PLA, ABS, TPU |
