DELAY/REVERB
,
VCF
,
and
DISTORTION
- can be changed by pressing the
ROUTING
button (15), letting you instantly achieve different flavors of sound.
There are six all possible orders for the
DELAY+REVERB
(FX)
,
DISTORTION+CABINET SIM+BITCRUSHER
(DISTOTION)
and
VCF
(FILTER)
blocks:
The selected order is shown by the
white
LED (15) near the selected option.
🠚
HINT
: experiment with the audio chain order to fit your needs and find new and
unexpected sounds with a push of a button.
We advise exploring the routing chains and picking your favorite based on each
situation.
LO-FI
One of the ways to lower audio fidelity is to use the onboard bitcrusher effect. It
radically brings aliasing to the audio path the more we turn it up – use on your own
discretion creatively to add lo fi flavor.
Bitcrusher can be accessed by holding the SHIFT button and turning the VOLUME
KNOB (7). From full 96 kHz at CCW and crushing to a certain moment until the
audio falls apart to noisy clicks and buzzes. Default value is at CCW (clean signal).
The bitcrusher is placed after the distortion (16) with cabinet simulator (17*) stages.
Bitcrusher allows to obtain interesting vowel sounds in ROUTING (15) types when
distortion is placed after the filter: modulating the filter cutoff with high resonance
and applying the bitcrusher effect after.
🠚
HINT:
another trick to to add lo-fi flavor to your audio is to slowly modulate the
time of the
DELAY
(9) with
fluctuating random LFO
(22). That will create a flutter
effect simulating a wobbly tape playback.
THREE FLAVORS OF FILTER
To switch the filter type you simply press the
SHIFT + REVERB
/FILTER*
button (13).
There are three filter types to choose with:
To Next Page
Loading...