TOPwave Device Description
15
As the following figures illustrate, the TOPwave is equipped with various connection op-
tions.
1 Control unit 4 Swiveling lid with vent connection
2 Magnetron cooling 5 Vent connection on swiveling lid
3 Vent connection oven 6 Electrical connections
The electrical connections are located on the right hand side of the microwave system.
1 Power switch 3 Connection power cord
2 Fuses 4 RS-232 port
The mains power switch is located on the back of the unit. Next to this are connections
for the power cord, fuses.
The RS-232 port is used for connecting to the basic instrument and the Ethernet port to
a network.
Connections at Basic unit
To Next Page
Loading...
