Need help?Do you have a question about the Endress+Hauser Ceraphant T PTP35 and is the answer not in the manual?
General| Type | Ceraphant T PTP35 |
|---|---|
| Protection Class | IP66/IP67 |
| Ambient Temperature | -40 to +85 °C |
| Measurement Principle | Piezoresistive |
| Output Signal | 4-20 mA |
| Process Pressure | 0 to 25 bar |
| Accuracy | ±0.5% of span |
| Protection Rating | IP67 |
| Process connection | G 1/2" or 1/2" NPT |
| Housing Material | Stainless Steel |
| Wetted Parts Material | 316L stainless steel |
| Communication | HART |
| Approvals | ATEX, IECEx |
| Power Supply | 12-30 V DC |
| Material | Stainless Steel |
| Process Temperature | -40 to 100 °C (-40 to 212 °F) |
Defines the intended purpose of the Ceraphant T pressure switch for measuring absolute and gauge pressures.
Guidelines for safe installation, commissioning, operation, and maintenance by qualified specialists.
Safety precautions, including warnings about Ex-areas and disassembly in pressurless conditions.
Details on the device nameplate, including order code, serial number, TAG number, and connection diagram.
Diagrams and guidelines for installing the Ceraphant T for gases, steam, and liquids.
Wiring diagrams and pin assignments for M12x1 connector versions (A1, A2, A2', A3, A3').
Wiring diagrams for versions using cable connections (C1, C2, C2', C3, C3').
Description of operating the Ceraphant T using its three keys and display.
Step-by-step guide to navigating the device's operating menu using the keys.
Steps for configuring basic settings like technical unit, zero point, and display options.
Details on setting up hysteresis, window functions, switch points, and analog output.
Explanation of E-codes for errors and W-codes for warnings, with corresponding remedies.
To Next Page