Need help?Do you have a question about the Endress+Hauser Ceraphant T PTP31 and is the answer not in the manual?
General| IP rating | IP67 |
|---|---|
| Process connection | Thread |
| Housing material | Stainless steel |
| Wetted parts material | 316L |
| Material | Stainless steel |
| Process Temperature | -200 to +600 °C |
Defines the intended application of the Ceraphant T pressure switch for measuring absolute and gauge pressures.
Specifies that installation, connection, and operation must be performed by trained specialists who understand these instructions.
Highlights that the device is not approved for explosion-hazardous areas and requires alternative monitoring measures.
Explains how to operate the Ceraphant T using its three keys and describes the function of LEDs and the digital display.
Guides users on how to navigate through the operating menu using the device's keys, including selecting function groups and functions.
Describes how to configure the device using configuration software like ReadWin 2000 or FieldCare via a PC.
Explains how to configure basic settings such as technical unit, zero point, and display options.
Covers configuring hysteresis and window functions for switch points, switch-back points, and contact types.
Details settings for switching characteristics, switch point, switch-back point, and delays for both output 1 and output 2.
Describes how to set a locking code, reset the device, check revision counters, and view the last device status.
Details electrical connection options, including M12x1 plug-in jacks, elbowed connectors, and cables with sockets and LEDs.
Lists error (E-Code) and warning (W-Code) messages, their explanations, and recommended remedies.
To Next Page