Ceraphant T PTC31, PTP31, PTP35 Identification
Endress+Hauser 5
2 Identification
The following options are available for identification of the measuring device:
• Nameplate specifications
• Order code with breakdown of the device features on the delivery note
• Enter serial numbers from nameplates in W@M Device Viewer
(www.endress.com/deviceviewer): All information about the measuring device is displayed.
For an overview of the technical documentation provided, enter the serial number from the
nameplates in the W@M Device Viewer (www.endress.com/deviceviewer).
2.1 Nameplate
To identify your device, compare the complete order code and the version information on the
delivery papers with the data on the nameplate.
P01-PTx3xxxx-18-xx-xx-xx-001
Fig. 1: Explanation of the nameplate - see table below
!
Note!
• The release number indicates the change status of the device. A change in the last two figures
does not have any affect on the compatibility - see also Chap. 9.5.
1
2
3
4
5
9
10
10 10
8
6
7
11
12
13
Ceraphant T
Made in Germany D-79689 Maulburg
p:
TAG:
Mat:
Ser.-No.:
Rel.:
Order Code:
MWP:
U:
I out:
15
L–
L+
2
1
3
4
14
1 Order code 6 Degree of protection 11 Electronics
2 Serial number 7 Degree of protection 12 Current output
3 TAG number 8 Sensor range 13 Supply voltage
4 TAG number 9 Max. operating pressure 14 Connection diagram
5 Release number
(change status)
10 Wetted materials 15 Approvals
To Next Page
Loading...
