Endress+Hauser Ceraphant T PTP31 - Available Accessories

Ceraphant T PTC31, PTP31, PTP35 Accessories
Endress+Hauser 21
8 Accessories
8.1 Process connection
• Ceraphant T PTC31:
The sensor module and the process connection are connected together and cannot be
separated.
• Ceraphant T PTP31, PTP35:
The process connection is an adapter and the sensor module has an adapter thread. As a result,
the process connection can easily be changed at a later stage.
Exceptions:
Process connection G ½A flush mounted, Clamp ½ and G 1A and 400 bar (6000 psi) sensors.
P01-PTx3xxxx-06-xx-xx-xx-006
Fig. 12: Process connection
➀ Sensor module PTC31
➁ Sensor module PTP31 and PTP35
➂ Adapter with threaded connection (apart from G ½A flush mounted)
➃ Adapter with Clamp connection (apart from Clamp ½")
➄ Adapter with hygiene connection (apart from G 1A)
M24x1.5
PTC31
PTP31, PTP35
2
3
4
5
1