Endress+Hauser Ceraphant T PTP31 - Device Operation; On-Site Operation Methods

Ceraphant T PTC31, PTP31, PTP35 Operation
Endress+Hauser 11
5 Operation
5.1 On-site operation
The Ceraphant T is operated by means of three keys.
!
Note!
Only use instruments with a blunt tip for operation (e.g. ballpoint pen).
Sharp instruments (e.g. needles, tweezers, pins) can destroy the operating unit.
P01-PTx3xxxx-19-xx-xx-en-003
Fig. 6: Position of operating elements and possibilities for display
Background illumination of the digital display:
–White = OK status
–Red = error status
The digital display and the light emitting diodes (LED) support navigation in the operating menu.
Operating key
Communications jack
for personal computer
Digital display
Yellow LEDs for switching states
LED on = switch closed
LED off = switch open
LED for status
Green = ok
Red = error
Red/green-blinking
= warning
E
22.07 bar