Endress+Hauser Cleanfit CPA871 - Mounting the Assembly

Cleanfit CPA871 Mounting
Endress+Hauser 21
5.2 Mounting the assembly
5.2.1 Installation
Measuring system
1
2
3
4
A0029620
 13 Measuring system (example)
1 Cleanfit assembly CPA871
2 Measuring cable
3 Liquiline CM44x transmitter
4 Sensor
Installation recommendation
The process seal seals the process in the end position. The assembly is open to the process
during insertion/retraction; the rinse connections must either be pipe-fitted or sealed.
The connection between the service chamber and the process is open during movement;
the sealing water function can be used as a result. The rinse chamber outlet must be
blocked (e.g., with a shutoff valve) to implement the sealing water function.