Endress+Hauser CPY7B - Commissioning; Filling the Vessel with Electrolyte

CPY7B Commissioning
Endress+Hauser 9
5 Commissioning
5.1 Filling the vessel with electrolyte
1.
Operational state:
‣
Close the manually operated valve
2.
Compressed air cut off:
‣
Manually operated valve closed
3.
‣
Undo the hose union
4.
Vent the vessel:
‣
Open the manually operated valve
5.
a
Remove the upper section:
‣
Hold by the hybrid open-ended
wrench (a) and loosen the coupling
nut
6.
Fill the vessel with electrolyte:
‣
Do not overfill the vessel.
The first four steps are not required for the unpressurized version (CPY7B-A).