Endress+Hauser Flowphant T DTT31 - Communication-Specific Accessories

Accessories Flowphant T DTT31, DTT35
36 Endress+Hauser
Version F in mm (in) L ~ in mm (in) C in
mm
(in)
B in mm
(in)
Clampin
g ring
material
Max.
process
temperatur
e
Max. process
pressure
R½" SW/AF 22 52 (2.05) - 20 (0.8) PTFE
2)
200 °C
(392 °F)
5 bar at 20 °C
(72.5 psi at 68
°F)
R¾" SW/AF 27 52 (2.05) - 20 (0.8) PTFE
2)
200 °C
(392 °F)
5 bar at 20 °C
(72.5 psi at 68
°F)
1) SS316 clamping ring: can only be used once. Once released the compression fitting cannot be repositioned on the
thermowell. Fully adjustable immersion length on initial installation
2)
PTFE/Elastosil
®
clamping ring: reusable; once loosened, the compression fitting can be moved up or down on the
thermowell. Fully adjustable immersion length
10.2 Communication-specific accessories
10.2.1 Coupling; connecting cable
• Coupling M12x1; straight
• Connection to M12x1 housing connector
• Materials: body PA, coupling nut CuZn, nickel-plated
• Degree of protection (connected): IP 67
• Order number: 52006263
A0035843
• M12x1 coupling; elbowed, for termination of
connecting cable by user
• Connection to M12x1 housing connector
• Materials: body PBT/PA,
• Coupling nut GD-Zn, nickel-plated
• Degree of protection (connected): IP 67
• Order number: 51006327
20
(0.79)
41
(1.61)
35 (1.38)
14.8
(0.58)
A0020722
 20 Dimensions in mm (in)