Endress+Hauser Flowphant T DTT31 - Mounting and Installation; Mounting Requirements and General Installation

Flowphant T DTT31, DTT35 Mounting
Endress+Hauser 9
3.3 Name and address of manufacturer
Name of manufacturer: Endress+Hauser Wetzer GmbH + Co. KG
Address of manufacturer: Obere Wank 1, D-87484 Nesselwang or www.endress.com
3.4 Certificates and approvals
3.4.1 CE mark
The product meets the requirements of the harmonized European standards. As such, it
complies with the legal specifications of the EC directives. The manufacturer confirms
successful testing of the product by affixing to it the CE-mark.
3.4.2 Hygiene standard
• EHEDG certification, type EL CLASS I. EHEDG-certified/tested process connections
→  42
• 3-A Authorization No. 1144, 3-A Sanitary Standard 74-07. Listed process connections
→  43
3.5 Storage and transport
Pack the device in such a way that it is reliably protected against impact during storage
(and transportation). The original packaging provides optimum protection.
Storage temperature –40 to +85 °C (–40 to +185 °F)
4 Mounting
4.1 Mounting requirements
4.1.1 Dimensions
→  41
4.1.2 Ambient temperature range
T
a
–40 to +85 °C (–40 to +185 °F)