Endress+Hauser Levelflex FMP57 - Page 173

Levelflex FMP56, FMP57 FOUNDATION Fieldbus Operating menu
Endress+Hauser 173
Switch-off delay 
Navigation  Setup → Advanced setup → Switch output → Switch-off delay
Prerequisite • Switch output function (→  169) = Limit
• Assign limit (→  170) ≠ Off
Description Define switch-off delay.
User entry 0.0 to 100.0 s
Factory setting 0.0 s
Failure mode 
Navigation  Setup → Advanced setup → Switch output → Failure mode
Description Define output behavior in alarm condition.
Selection • Actual status
• Open
• Closed
Factory setting Open
Switch status
Navigation  Setup → Advanced setup → Switch output → Switch status
Description Displays the current state of the switch output.
Invert output signal 
Navigation  Setup → Advanced setup → Switch output → Invert outp.sig.
Description Specify whether the output signal is to be inverted.
Selection • No
• Yes
Factory setting No