Endress+Hauser Liquiline CM444 - Page 13

Liquiline CM442/CM444/CM448 Installation
Endress+Hauser 13
1
2
3
4
56
7
8
A0033044
 3 Post mounting
1 Weather protection cover (optional) 5 Spring washers and nuts (post mounting kit)
2 Post mounting plate (post mounting kit) 6 Pipe or railing (circular/square)
3 Spring washers and nuts (post mounting kit) 7 Mounting plate
4 Pipe clamps (post mounting kit) 8 Threaded rods (post mounting kit)
A0033045
 4 Post mounting
A0025885
 5 Attach the device and click it into place
1. Place the device on the mounting plate.
2. Slide the device downwards in the guide on the mounting rail until it clicks into place.