Need help?Do you have a question about the Endress+Hauser RMS621 and is the answer not in the manual?
General| Input signal | 4-20 mA |
|---|---|
| Output signal | 4-20 mA |
| Communication | HART |
| Display | LCD, backlit |
| Number of channels | 1 |
| Frequency | 50/60 Hz |
| Measuring range | Depending on the connected sensor |
| Process temperature | Depending on the connected sensor |
| Process pressure | Depending on the connected sensor |
Defines purpose, safe operation, and manufacturer responsibility.
Covers safe installation, commissioning, and operation by skilled personnel.
Explains safety icons and symbols used in the manual for proper procedures.
Details device identification via nameplate, order code, and unit series number.
Lists package contents and information on certifications and relevant standards.
Specifies environmental conditions, dimensions, and step-by-step mounting procedures.
Instructions for inserting and securing extension cards into the device slots.
Checks to perform after installation, including verifying extension cards and connections.
Provides a visual overview and terminal assignments for basic wiring connections.
Details connections for power supply, sensors (active, passive, RTD), and measuring units.
Details connections for analog, pulse, and relay outputs, plus RS232/RS485 interfaces.
Terminal assignments for extension cards and connecting a remote display/operating unit.
Final verification steps to ensure electrical installation and connections are correct.
Overview of the device's display, LEDs, interface socket, and input keys.
Interacting with the device locally, entering text, and understanding key icon functions.
How system and process errors are displayed, indicated, and acknowledged.
Configuring and communicating with the device via RS232, RS485, and PROFIBUS.
Verifying checks, powering on the device, and initial setup prompts.
Navigating configuration menus and understanding the function matrix for device setup.
Accessing menus for analyzing device functionality and configuring parameters.
General guidance and details on system error messages, causes, and remedies.
Lists process errors, their causes, and troubleshooting steps for resolution.
Lists spare parts with order numbers and provides instructions for returning the device.
Guidelines for environmentally sound disposal of the device and its electronic components.
Technical specifications for various input signals like Current, PFM, Pulse, and Temperature.
Technical specifications for output signals such as Current, Pulse, TPS, and switching outputs.
Details on power supply units and performance characteristics under reference conditions.
Specifies installation conditions, environmental limits, EMC, and mechanical construction.
Glossary of system units used for measurements like Volume, Temperature, Pressure, and Mass.
Overview of how the Energy Manager configures various flow measurement types.
Explains methods for calculating flow based on differential pressure measurements.
To Next Page
