RMS621 Trouble-shooting
Endress+Hauser 59
9.5 Return
For a return, e.g. in case of repair, the device must be sent in protective packaging. The original
packaging offers the best protection. Repairs must only be carried out by your supplier's service
organisation. An overview of the service network can be found on the address page of these
Operating Instructions.
!
Note!
When sending for repair, please enclose a note with a description of the error and the application.
9.6 Disposal
The device contains electronic components and must, therefore, be disposed of as electronic waste
in the event of disposal. Please also observe local regulations governing disposal.
To Next Page
Loading...
