Identification RMS621
10 Endress+Hauser
2 Identification
2.1 Device designation
2.1.1 Nameplate
Compare the nameplate on the device with the following diagram:
Fig. 3: Energy manager legend plate (example)
1 Order code and unit series number
2 Protection class and allowable ambient temperature
3 Power supply
4 Temperature sensor input with measurement range
5 Approvals with accuracy details
6 Available in/outputs
2.2 Scope of delivery
The scope of delivery of the Energy Manager comprises:
• Energy Manager for top-hat rail mounting
• Operating Instructions
• CD-ROM with PC configuration software and interface cable RS232 (optional)
• Remote display for panel mounting (optional)
• Extension cards (optional)
!
Note!
Please note the device accessories in Section 8 ’Accessories’.
2.3 Certificates and approvals
CE mark, declaration of conformity
The Energy Manager has been constructed and tested to state-of-the-art operational safety standards
and left the factory in perfect condition as regards technical safety. The device meets the relevant
standards and directives as per EN 61 010 "Safety requirements for electrical equipment for
measurement, control and laboratory use".
Thus, the device described in these Operating Instructions meets the legal requirements of the EU
Directives. The manufacturer confirms successful testing of the device by affixing to it the CE mark.
The device has been developed in accordance with the requirements of the Directives OIML R75
(heat counter) and EN-1434 (flow measurement).
To Next Page
Loading...
