Endress+Hauser Micropilot FMR67B - Product description; Product Design Overview

Installation Micropilot FMR67B HART
12 Endress+Hauser
A0048891
 1 Horn antenna with alignment unit
Information about the mounting nozzle
The maximum nozzle length H
max
depends on the nozzle diameter D.
The maximum nozzle length H
max
depends on the nozzle diameter D
D H
max
H
max
øD
80 to 100 mm (3.2 to 4 in) 1 700 mm (67 in)
100 to 150 mm (4 to 6 in) 2 100 mm (83 in)
≥ 150 mm (6 in) 3 200 mm (126 in)
In the case of longer nozzles, reduced measuring performance must be expected.
Please note the following:
• The end of the nozzle must be smooth and free from burrs.
• The edge of the nozzle should be rounded.
• Mapping must be performed.
• Please contact the manufacturer's support department for applications with nozzles
that are higher than indicated in the table.