Endress+Hauser Nivotester FTL325P - 5.3 Post-installation check

Installation Nivotester FTL325P, 3-channel
12 Endress+Hauser
5.2.4 Removing the device
FTL325
0 V
L1
L+
N
L–
U"
1.
2.
A
B
A0039140
 6 Removing
A Remove from DIN rail.
B For quick replacement of devices without a cable, remove the terminal strips.
5.3 Post-installation check
 Is the measuring device undamaged (visual inspection)?
 Does the measuring device conform to the measuring point specifications?
For example:
• Supply voltage
• Ambient temperature range
 Are the measuring point number and labeling correct (visual inspection)?
Is the measuring device adequately protected against precipitation and direct sunlight?