Endress+Hauser Nivotester FTL325P - 2.5 Product safety; 2.6 IT security; 3 Product design

Nivotester FTL325P, 3-channel Product design
Endress+Hauser 7
2.5 Product safety
This device has been constructed and tested to state-of-the-art operational safety
standards and in accordance with good engineering practice. The device left the factory in
a safe operating condition.
2.5.1 CE mark
The device meets the legal requirements of the applicable EU Directives. These are listed in
the corresponding EU Declaration of Conformity along with the standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the CE mark.
2.5.2 EAC conformity
The device meets the legal requirements of the applicable EAC Directives. These are listed
in the corresponding EAC Declaration of Conformity along with the standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the EAC mark.
2.6 IT security
Provide additional protection for the device and data transfer to/from the device
‣
IT security measures defined in the plant owner/operator's own security policy must be
implemented by plant owners/operators themselves.
3 Product design
1
3
4
5
2
6
1 2
ON
A0039127
 1 Product design
1 Housing
2 External terminals
3 Front panel can be folded down
4 Internal terminals
5 Test button, can also be operated from the outside
6 External terminals