Endress+Hauser Nivotester FTL325P - 4 Incoming acceptance and product identification; 4.1 Incoming acceptance; 4.2 Product identification

Incoming acceptance and product identification Nivotester FTL325P, 3-channel
8 Endress+Hauser
4 Incoming acceptance and product
identification
4.1 Incoming acceptance
Check the following during goods acceptance:
 Are the order codes on the delivery note and the product sticker identical?
 Are the goods undamaged?
 Do the nameplate data match the ordering information on the delivery note?
 If necessary (see nameplate), are the Safety Instructions, e. g. XA, provided?
If one of these conditions is not satisfied, contact your Sales Center.
4.2 Product identification
Nameplate data on the device
‣
Enter the serial number from the nameplates in the W@M Device Viewer
(www.endress.com/deviceviewer)
 All the information about the measuring device and all associated Technical
Documentation are displayed.
‣
Enter the serial number from the nameplate in the Endress+Hauser Operations app.
 All the information about the measuring device and all associated Technical
Documentation are displayed.