Endress+Hauser Nivotester FTL325P - 8 Commissioning; 8.1 Function check; 8.2 Setting the functions

Commissioning Nivotester FTL325P, 3-channel
18 Endress+Hauser
8 Commissioning
8.1 Function check
 Perform installation check.
 Perform function check.
8.2 Setting the functions
1 2
ON
CH1
MAX
MIN
1 2
ON
CH2
CH3
MIN
MAX
MIN
MAX
1 2
ON
1
2
3
Δ Δs CH2+CH3, !CH1 / s CH2+CH3
!CH2 / !CH1 + CH2
!CH1+CH2+CH3
A0039195
 14 Switch for setting the functions
DIL switch CH1
• Set MAX/MIN (1)
• Set fault ON/OFF (2)
DIL switch CH2 + CH3
• Set CH2 MIN/MAX
• Set CH3 MIN/MAX
Switches for MODE settings
• (1) Δs, e. g. Pump control
• (2) Two level relays
• (3) Single channels
For applications requiring functional safety in accordance with IEC 61508 (SIL), see
the Functional Safety Manual. For WHG applications, see the associated WHG
documents.