Endress+Hauser Prosonic M FMU40 - Scope of Delivery; Certificates and Approvals

Prosonic M FOUNDATION Fieldbus Wiring
Endress+Hauser 15
3.2 Wiring in T12 housing
3.3 Wiring with FOUNDATION Fieldbus connector
1. Unscrew housing cover (1).
2. Insert cable (2) through gland (3).
3. Connect cable screen to the grounding
terminal (4) within the terminal
compartment.
4. Make connection (see terminal
assignment).
5. Tighten cable gland (6).
Max.torque 10...12 Nm (7.37...8.85
lbf ft)!
6. Screw on housing cover (1).
7. Switch on power supply.
L00-FMxxxxxx-04-00-00-xx-032
3
2
12
3
4
4
1. Insert plug (1) into bushing (2).
2. Screw firmly.
3. Ground the device according to the
desired safety concept.
L00-FMP4xxxx-04-00-00-xx-004
1
2