Endress+Hauser RIA15 - Product Safety

Identification RIA15
8 Endress+Hauser
Ord. cd.: XXXXXXXX
Ser. no.: XXXXXXXXXXXXXXXXX
Ext. ord. cd.: RIA15-XXXXXXX
Ta= -40...+60°C
Front IP65 Type 4X Encl.
Loop powered 4...20 mA
RIA15 Made in Germany 2012
D-87484 Nesselwang
1
2
4
5
6
7
Class2 circuit or SELV circuit
3
9
8
A0019608
 1 Nameplate of the process display unit (example)
1 Order code of the device 6 Device designation
2 Serial number of the device 7 Approvals (optional)
3 Extended order code of the device 8 Input signal
4 Manufacturer's address 9 Housing degree of protection
5 Ambient temperature range
3.2 Scope of delivery
The scope of delivery of the device comprises:
• Panel-mounted device
– Process display unit
– Brief Operating Instructions
– Ex Safety Instructions (optional)
– Fastening fixtures
– HART
®
communication resistance module (optional)
• Field device
– Process display unit
– Brief Operating Instructions
– Ex Safety Instructions (optional)
– Fastening fixtures for wall/pipe mounting (optional)
– HART
®
communication resistance module (optional)
– Weather protection cover (optional)
3.3 Certificates and approvals
An overview of all available approvals is provided in the "Technical data" section in the relevant
Operating Instructions.
CE mark, Declaration of Conformity
The device is designed to meet state-of-the-art safety requirements, has been tested, and left
the factory in a condition in which it is safe to operate. The device complies with the
applicable standards and regulations in accordance with EN 61010-1 "Safety requirements for
electrical equipment for measurement, control and laboratory use".