Endress+Hauser RIA251 - Operating Menu Overview; 5 Operating Parameter Description

4.3 Operating menu overview
5. Operating parameter description
Decimal point Display value
0%
Display value
100%
Offset User code
Parameter Setting up selections
Default
settings
Actual
settings
Decimal point
Selecting the decimal
point of the numeric
display
Selection range:
0 to 4 decimal points
Display value 0%
Display value of the 4 mA
current signal
Values:
-19999 to 99999
Display value 100%
Display value of the
20 mA current signal
Values:
-19999 to 99999
Offset
Signal offset for matching
to the measured value
display
Values:
-19999 to 32767
Benutzercode
Freely settable user
code. A user code that is
already entered can only
be changed if the old
unlock code is entered.
Then the new code can
be set up.
Values:
0000to9999
Note:
There is no active user code
on "0"
Process display
24