Need help?Do you have a question about the Endress+Hauser RIA 450 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Output | Analog and digital outputs |
| Communication | HART |
| Housing material | Plastic or aluminum |
| Protection | IP66 |
| Mounting | Panel mounting |
| Measuring Principle | Resistance or voltage measurement |
| Measuring Range | Depending on the sensor used |
| Accuracy | ±0.1% of the full scale |
| Ambient Temperature | -20 to +60 °C |
| Process Temperature | Depending on the sensor used |
Describes terminal layout and power supply connections for the unit.
Details how to connect various external sensors to the device.
Explains the procedure for configuring unit parameters using the operating matrix.
Provides a comprehensive overview of the operating matrix and parameter addresses.
Details the various input parameters and their available settings.
Describes parameters related to alarm set points and relay settings.
Covers additional operating parameters like user codes and time delays.
Outlines service parameters, including service codes and test functions.
Explains the settings and functions for the four alarm relays.
Details how to define and display engineering units on the device.
Describes a specific application example for deep well measurement.
To Next Page