Delay DELY:
Using this function a time delay
DELY can be set between the
set point SP and the actual de-energising of the relay.
If the measurement value falls below the preset switch
threshold SP (without hysteresis) within the time delay DELY
then the switch delay time counter is reset to zero. The time
counter restarts after a new infringement of the preset switch
threshold SP.
This is also valid for minimum monitoring.
6.2 Engineering unit menu group
Engineering units
DIM1, DIM2, DIM3, DIM4:
In the menu group LINE CHAN individual user engineering
units can be defined under
DIM1, DIM2, DIM3, DIM4. The unit
appears later in the 14 segment component of the display.
DIM1 left upper display field
DIM2 right upper display field
DIM3 left lower display field
DIM4 right lower display field
Selectable character set:
%()*+,-/0123456
789@ABCDEFGHIJK
LMNOPQRSTUVWXYZ
\abcdhilmnoruvw
y°±
Space
À Relay de-energised
DELY
SP
HYST
Process display
54
To Next Page
Loading...
