Endress+Hauser Promag User Manual

Products Solutions Services
Installation Instructions
Alteration to Display module,
to Display module with
WirelessHART or Display
module with WLAN
Promag, Promass 300, 500, 500-digital,
Prosonic Flow 300, 500-digital
EN Installation Instructions: EA01158D →  3
DE Einbauanleitung: EA01158D →  25
EA01158D/06/A2/05.19
71440122
2019-08-02

Endress+Hauser Promag Specifications

General

Device Type	Electromagnetic Flowmeter
Measuring Principle	Faraday's law of electromagnetic induction
Process Pressure Range	Up to 40 bar (depending on nominal diameter)
Accuracy	±0.2% of measured value ±1 mm/s
Output Signals	4-20 mA, pulse, frequency
Power Supply	24 V DC, 100-230 V AC
Housing Material	Aluminum, stainless steel
Lining Material	PTFE, PFA
Electrode Material	Tantalum, Platinum, depending on the specific model
Approvals	ATEX, IECEx, FM, CSA, NEPSI
Communication	HART, PROFIBUS PA, FOUNDATION Fieldbus, Modbus
Protection Class	IP67

Summary

Overview of conversion kit

Personnel authorized to carry out conversion

Safety instructions

Symbols used

Symbols for certain types of information

Explains symbols like Permitted, Forbidden, Tip, and Series of steps.

Tools list

Promag, Promass, Prosonic Flow 300

Converting the blind version of the transmitter to a transmitter with a display module and cover with window

Instructions for converting the transmitter to include a display module and cover.

Promag, Promass 300, 500, Prosonic Flow 300

Converting the transmitter with a display module to a transmitter with a display module and WirelessHART interface and an external antenna or WLAN interface and optional external antenna

Steps to convert transmitters for WirelessHART or WLAN interfaces with external antennas.

Mounting the wireless antenna with cable

Flashing the device following conversion

Modifying the label

Instructions for modifying the tie-on label after device conversion.

Checking the data on tie-on label

Verify serial number and new order code on the tie-on label.

Promag, Promass, Prosonic Flow 500-digital

Converting the transmitter with a display module to a transmitter with a display module and WirelessHART interface and an external antenna or WLAN interface and optional external antenna

Convert transmitters for WirelessHART or WLAN with external antennas.

Aluminum transmitter housing

Specific instructions for the aluminum transmitter housing during conversion.

Polycarbonate transmitter housing

Specific instructions for the polycarbonate transmitter housing during conversion.

Mounting the wireless antenna with cable

Flashing the device following conversion

Modifying the label

Instructions for modifying the tie-on label after device conversion.

Checking the data on tie-on label

Verify serial number and new order code on the tie-on label.

Operating options and characteristics of WLAN antenna

Modifications to the product roots and extended order codes in the CER database on ENGINE