Endress+Hauser Promag 500 - User Manual

Products Solutions Services
EA001164D/06/A2/01.16
71327830
Alteration Instructions
Promag 300, 500
Promass 300, 500
Activate the Software Licence Code
These Instructions are Alteration Instructions; they
do not replace the Operating Instructions included in
the scope of supply.
For detailed information, refer to the Operating
Instructions and other documentation or visit
"www.endress.com/deviceviewer".

Endress+Hauser Promag 500 Specifications

General

Device Type	Electromagnetic flowmeter
Process Pressure	Max. 40 bar (580 psi)
Output Signals	4-20 mA, pulse/frequency, alarm
Communication Protocols	HART, PROFIBUS PA, FOUNDATION Fieldbus
Power Supply	24 V DC
Enclosure Protection	IP67
Lining Material	PTFE, PFA
Electrode Material	Tantalum
Measuring Principle	Faraday's Law of Electromagnetic Induction
Nominal Diameter	DN 15 to DN 1200
Accuracy	±0.2% of measured value

Summary

Overview Registration Key

Authorized Personnel

Authorized Personnel to Affix New Nameplates

Safety Instructions

Tool List

Safety Symbols

Symbols for Certain Types of Information

Activate Application Package via Software Licence Code

Enter Software Option Code via Display

Step-by-step guide for entering the software option code using the device's display.

Enter Software Option Code via Webserver

Instructions for activating software options using a web server interface.

Enter Software Option Code via FieldCare

Procedure for entering the software option code using FieldCare software.

Change Device Roots and Order Codes in CER Database

Process for updating device data and order codes in the CER database on Engine.