Endress+Hauser Promag 500 - Enter Software Option Code via Webserver

Activate the application package via Software Licence Code
9
8.2 Enter the Software option code via Webserver
Open Webserver:
1. Select language
Login Webserver:
2. Webserver language: Select language
3. Login →
access status → Maintenance → Enter access code: Input code factory setting = 0000
or the changed code (customer code)
4. Menubar menu
5. Main menu
6. Expert
7. System
8. Administration
9. Activate software option: Enter software option code
10. Confirm software option code with "Enter"
11. Overview ot the software option: Display of the activated software option(s)
12.
Check of the date on the tag :
• Serial number of the device
• Order code new
• Entered activation code for the software-options (application package code)