Endress+Hauser Promag - Personnel authorized to carry out conversion

EA01158D
Endress+Hauser 5
Order structure Expansion Conversion kit (contents)
Conversion kits for Promag, Promass, Prosonic Flow 500-digital
DKZ002–****FGA*** Promag, Promass Prosonic Flow 500-
digital transmitter with display to
Promag, Promass Prosonic Flow 500-
digital transmitter with display and
WLAN interface
1 × WLAN display with ribbon cable
and WLAN interface,
1 × tie-on label,
1 × conversion instructions
DKZ002–AA**FGA***+P8
DKZ002–GR**FGA***+P8
Promag, Promass Prosonic Flow 500-
digital transmitter with display to
Promag, Promass Prosonic Flow 500-
digital transmitter with display and
WLAN interface including external
antenna
1 × WLAN display with ribbon cable
and WLAN interface including external
antenna,
1 × tie-on label,
1 × conversion instructions
DKZ002–AABAFHA***+P8
DKZ002–GRBAFHA***+P8
Promag, Promass Prosonic Flow 500-
digital transmitter with display to
Promag, Promass Prosonic Flow 500-
digital transmitter with display and
WirelessHART interface including
external antenna
1 × WirelessHART display with ribbon
cable and WirelessHART interface
including external antenna,
1 × tie-on label,
1 × conversion instructions
2 Personnel authorized to carry out conversion
Authorization to carry out a conversion depends on the measuring device's approval type. The
table below shows the authorized group of people in each case.
Measuring device approval Personnel authorized to carry out conversion
1)
Without approval 1, 2, 3
With approval (e.g. IECEx) 1, 2, 3
For custody transfer 4
1) 1 = Qualified specialist on customer side, 2 = Service technician authorized by Endress+Hauser,
3 = Endress+Hauser (return measuring device to manufacturer)
4 = Check with local approval center if installation/modification must be performed under supervision.