Endress+Hauser Promag - Flashing the device following conversion; Modifying the label; Checking the data on tie-on label

EA01158D
Endress+Hauser 21
12 Flashing the device following conversion
Following conversion to WirelessHART, the device must be flashed via Fieldcare with the
valid software (Note: Flashing is not possible via web server).
12.1 Modifying the label
12.2 Checking the data on tie-on label:
• Serial number of device
• New order code
• Attach tie-on label as per the diagram using wire cable and crimp barrels:
1